Top
FPV Drone ESC

Raptor S-Tower

Buy now
PRODUCT FEATURES

img-1.jpgimg-2.jpgimg-3.jpgimg-4.jpg

SPECIFICATION
Model
Battery
Con. Current
Burst Current(10S)
BEC
Weight
Size
Firmware
Typical Applications
Product features
Raptor S-Tower-20A
Raptor S-Tower-30A
Raptor S-Tower-40A
2-4s
2-4s
2-4s
20A
30A
40A
30A
40A
50A
5V/1A&12V/0.5A(F.C)
5V/1A&12V/0.5A(F.C)
5V/1A&12V/0.5A(F.C)
20g
20g
20g
41.5×36×19.6mm
41.5×36×19.6mm
41.5×36×19.6mm
A-H-30
A-H-30
A-H-30
130-330mm Multi
170-450mm Multi
170-450mm Multi

● EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency.

● Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.

● Two layers tower structure between 4in1 ESC and FC using quick pin connection. Dual ways signal transmission makes the 

 flight more stable 

● Exposed pads for Battery and Motor wires, fast welding without additional disassembly, makes the installation faster and 

 more convenient. 

● F3 flight controller, supports PPM, PWM and SBUS remote control / receiving mode.

● FC integrated OSD, also integrated 5V/1A, 12V/500mA for VTX, camera, buzzer, LED and other peripheral devices ; 

 provided several silicone cables for connectors on FC ,and will give you an unprecedented experience for installation;

● Built-in current meter, OSD directly display the real-time current without any additional connection;

● BLHeli-S firmware. It designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth 

 throttle response and silent operation. 

● The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . 

● Supports Dshot150, Dshot300 and Dshot600.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.


TECHNICAL SUPPORT
Troubleshooting
1. Does it support IBUS receivers?
Yes. Its wiring method is the same as SBUS. And you must choose IBUS in the receiver option of betaflight

If you have any ideas or Suggestions about our products, please let us know